Emmma jest multiemulatorem egzotycznych mikrokoputerów, o których w Polsce prawdopodbnie nikt nieslyszał. Część maszynek można było złożyć samemu, część dzielnie pracowały w Serbii, Hiszpanii, czy też Danii. Wśród emulowanych mikrokomputerów jest też jeden fliper (Cidelsa), parę konsolek do gier (RCA Studio II, Victory MPT-02, Visicom COM-100). Lwia część konstrukcji pochodzi z końca lat 70 i nawet, ze względu na historię warto na nie rzucić okiem.
Changes introduced in V1.29 / December 21 2018
General
- Fixed a bug in update check, should work again from V1.29 and onwards
- Fixed bog in MCDS and MS2000 start butons which were switched around
Cosmac Elf
- Fixed a bug in update of address leds
Cosmac Elf 2000
- Fixed a bugs in ElfOs (elfos2k_0_2_8b.hex, elf2k-installation.ide) and Elf2K ROM (v88b.bin) when running on intel 8275 video. These versions are NOT formal released versions but patched by me.
- Added a feature to correct IDE file if used in combination with intel 8275 video
- Added intel 8275 MINIMON-8275 with patched @ command to use R3 instead of R0 (R0 cannot be used in combination with intel8275 as it is used for video DMA)
VIP2K Membership Card
- Included latest VIP2K Monitor including Chip 8 Interpreter designed by me :)
- Improved Key handling
- Improved auto LOAD/SAVE function
- Fixed hanging of Emma 02 when sequencer ROM is not available
→ NOWSZY [MULTI] Emma 02 V1.43
EMMA 02 Changelog V1.43
General
- Bug fix for random routine in VIP and Studio IV SuperChip interpreters
- Included latest builds for all crosslib games
Video Terminal
- Added option in VT100 setup to select 132 column screen
- Fixed bug in VT100 setup save feature
Cosmac Elf 2000
- Fixed a bug in ide handling; BUSY bit was not reset at READ, WRITE or ID
- Added support for UART and Serial XMODEM
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Added support for TMS9918 sprites and multicolor mode (next to the already supported graphic I, graphics II and text modes)
- Bug fixes for TMS9918
- Default color definition fixed for TMS9918
- Fixed a bug in ide handling; BSY bit was not reset at READ, WRITE or ID
- Fixed XMODEM/Cassette toggle button on linux
- Added support for UART XMODEM
EMMA 02 Changelog V1.42
General
- Bug fixed on windows where text in Profiler and Assembler was not readable when using scaling.
Debugger
- Added Memory Dump option for RTC RAM for the Elf 2000 and Pico/Elf V2 emulators
- Added option to save specific parts of memory in the Memory Dump tab
- Added a LDRL macro; LDL with reversed memory loading (first low byte then high)
- The following save functions will ask to overwrite a file if it exists instead of adding a sequence number: Save in Memory Dump, Log in Debug 1802 and Log in Debug Pseudo
Help
- Continued restructure and improvements of the help pages including screenshots
Video Terminal
- Added basic (not tested) support for CDP1854 UART interrupt handling, triggering on DA (Receipt of Data) and THRE/TSRE (Transmitter Done) when IE is set in the CDP1854 and CDP1802.
- Fixed a bug in saving of 'Exteral' video terminal setting in configuration
- Added Ef an Q reversal options in VT Setup for Cosmac, Netronics and Super Elf
- Removed YMODEM packet size in VT Setup for External terminal
Cosmac Elf 2000
- Added full YMODEM support, including support for Elf/Os 'ys' utility. Note receive mode is not tested as currently there is no yr command for the Elf 2000.
- Added Elf/Os 4.1.0 ROMs and ide file.
Cosmac Elf, Netronics Elf II, Quest Super Elf, Pico/Elf
- Bug fix which caused TMS9918 video to crash.
- Bug fix which caused TMS9918 not to refresh on video memory write.
- Bug fix which caused a crash on exit when using the 1MB Mapper
- Added full YMODEM support, including support for Elf/Os 'ys' utility. Note receive mode is not tested with UART as currently there is no yr command supporting that configuration.
- Added auto option for YMODEM packet size, auto mode will use 1024 if more data is avaialble and 128 when less that 1024 bytes are available.
- Added support for auto mode on X/YMODEM when using Elf/Os 4.1.0.
- Added Elf/Os 4.1.0 ROMs and ide file.
- Added Gaston's STG Video ROMs as well as menu items for Pico/Elf using that ROM.
- Added Ef an Q reversal options in VT Setup, they are also still available in the DevicePorts GUI
EMMA 02 Changelog V1.41
General
- Added a 'Profiler' tab, see profiler section below.
- Renamed 'Debugger' tab to 'Tools'
- Renamed 'Timing & Spec' tab to 'Configuration'
- Moved timing info and time interval feature to the new 'Profiler' tab
- Added CPU type, Instructions Executed and Instructions/second in the timing info area (now on the 'Profiler' tab)
- Fixed issue when loading configuration menu's when OS setting is using a comma as decimal number separator
Profiler
- New Profiler tool ('Profiler' tab under 'Tools') with main purpose
- To find "Hot Code Spots" in any running software
- To find "Dead Code Spots" in any running software
- As a "Code Coverage Tool" to confirm that all code is executed during testing
- Measuring a time interval between two triggers (with Q flag or OUT x)
- Profiler tool is implemented mainly in the new 'Profiler' tab but also as an additional dump type as part of the Memory Dump tool (see Emma 02 help pages for delails)
Direct Assembler
- Changed navigation buttons to a scrollbar
Help
- Started restructure and improvements of the help pages including screenshots
- Added help for the new profiler tool
COMX-35
- Added the latest bug fix COMX ROM version 1.3 with a fix so address range 4FF7 to 4FFF is not destroyed during reset
FRED 1 & 1.5
- Fixed crash on pressing of the VideoSetup button
EMMA 02 Changelog V1.40
Cosmac Elf 2000
- Fixed a bug in IDE handling; BUSY bit was not reset at READ, WRITE or ID
- Added support for UART and Serial XMODEM
- Added support for UART and Serial HEX load into Elf2K monitor
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Fixed a bug in ide handling; BSY bit was not reset at READ, WRITE or ID
- Fixed XMODEM/Cassette toggle button on linux
- Added support for UART XMODEM
EMMA 02 Changelog V1.39
General
- Added Pico/Elf V2 emulator, implemented via loading Pico/Elf configurations to Elf emulators
- Fixed bug in CTRL 'paste' function on OSX and for all platforms on Elf 2000 with UART terminal
- Added Xhorde game binaries for the COMX, Pecom and Microboard System. These games are written in C and build using Crosslib library, 1802 devkit and the LCC1802 Compiler. Crosslib and the game code is designed by Fabrizo Caruso, the LCC1802 Compiler by Bill Rowe and the 1802 devkit by myself.
Installation
- Corrected windows installation, now also installing all files in Elf folder
Debugger
- Changed drop down choicebook to notebook so it is easier to switch between debugger tabs
Cosmac VIP
- Added warning window on startup shown only if address 0xFFF is used in combination with vip.rom. This as this combination would corrupt program loaded on 0xFFF due to the RAM check performed.
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Added Pico/Elf V2 support
- Added XMODEM send/receive and YMODEM receive options (for use with Pico/Elf)
- Added bootstrap option to Cosmac Elf and Netronics Elf II and changed behavior on Quest Super Elf to load ROM 1 (binary) file to 0x8000.
EMMA 02 Changelog V1.38
General
- Added configuration files to select COMIX-35 emulation (COMX without DRAM refresh)
- Fixed bug in full screen mode
Debugger
- Changed Debugger / Message tab to Timing & Specification
- Added option to measure time intervals where start/stop is triggered by setting Q or executing an OUTx
COMX-35
- Added option to turn DRAM refresh off
- Added updated versions of Xchase, Xshoot and Xbomber (running on COMIX)
- Added NTSC and PAL versions of new Xsnake game
Pecom
- Corrected DMA timing (more frequent DMA refresh)
- Fixed bug in handling of the BREAK key
- Added updated versions of Xchase, Xshoot and Xbomber (running on Pecom without DRAM refresh)
- Added new Xsnake game
EMMA 02 Changelog V1.37
General
- Added possibility to paste text into a video and terminal emulation (CTRL V/command V), V character is changeable in the Function and Hot key menu.
- Added Xchase, Xshoot and Xbomber game binaries for the COMX, Pecom, TMC600, Cidelsa and Microboard System. These games are written in C and build using Crosslib library, 1802 devkit and the LCC1802 Compiler. Crosslib and the game code is designed by Fabrizo Caruso, the LCC1802 Compiler by Bill Rowe and the 1802 devkit by myself.
Installation
- Added check on startup for 'new release', if a new release is started a question will popup suggesting a re-install of the config files and 1802 SW. On 'Yes' those are installed during startup.
Debugger
- Added support for assembler/disassembler for VIP Tiny BASIC pseudo code and Studio IV Tiny BASIC pseudo code.
- Added support for assembler/disassembler for Super-chip running on the modified VIP and the Studio IV.
Cosmac VIP
- Added Tiny BASIC binary file
- Added a Super-chip interpreter, designed by me, running on a modified VIP (high resolution video and minimum 8K RAM).
Chip 8
- Added multiple Chip-8 Games, Programs and Demos
- Added multiple Super-chip Games and Programs
Microboard System
- Added support and configuration file for the CDP18S695 MCDS Color System (UT63 binary is still missing)
- Added support for the CDP18S661V1 Video (NTSC) board
- Multiple bug fixes for the CDP18S661 boards
- Added BASIC3 Runtime binaries and config file for Hello World example
- Added new versions of tictac.bas, ticcmp.bas and euph.bas as the old versions had a corrupted end of line somewhere causing the Microdos BASIC1 compiler to end with an error code
MS2000
- Fixed EF4 handing, solving an issue when using FFORTH
- Added new versions of tictac.bas, ticcmp.bas and euph.bas as the old versions had a corrupted end of line somewhere causing the Microdos BASIC1 compiler to end with an error code
RCA Studio II
- Added homebrew race game (race.st2), amazing graphics on Pixie screen!
RCA Studio IV
- Added Tiny BASIC, which I ported from the VIP version. RCA also had a Tiny BASIC port of which we initially only found half of the source. The other half is based on the VIP code with adaptations to run on the Studio IV.
- Added the original Tiny BASIC, which was recently found at the Hagley Museum and Library.
- Added a Super-chip interpreter, designed by me, running on a Studio IV from RAM in the cartridge ROM location.
Pecom
- Fixed incorrect handling of key input and VIS output
EMMA 02 Changelog V1.36
General
- Added Infinite UC1800 Emulator
- Added VIP II RCA option based on recently discovered VIP II schematics
- Corrected bug in handling of empty wav files on startup of gui
- Bug fixes
Membership Card
- Added support for front panel 'J'
- Included 'Adventure+' game and configuration file
Microboard System, MS2000
- Added UT70 SW, including some corrections in upd765 emulation
Video Terminal
- Added option to surpress error ESC sequences
EMMA 02 Changelog V1.35
General
- Changed handling of GUI for different operating systems, simplifying changing settings for future OS support
- Fixed a bug/crash on Linux when changing zoom with spin button
- Changed zoom handling with spin button solving an issue with reducing size instead of increasing in some cases as well as the other way around
Installation
- Added support in linux installation packages for OpenSUSE and Elementary OS, Zorin OS & Kali
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Corrected multiple bugs in emulation of MC6847
- Added SW from the Elf II Collection from a donated system by George Musser in 2017 to the Vintage Computer Federation museum at InfoAge in Wall NJ USA. Tapes and some documents were digitized and provided by Herb Johnson retrotechnology.com in 2019. Conversion and testing was done by me in 2019 and 2020.
- Elf Games: Curses Foiled Again, Blackjack, Breakout, Pinball, Target Game, The 15 Puzzle, X-Ray (in 'Elf/Games' folder
- Chip 8: Acey Deucy, Jackpot, Knockout, Tank Warfare (in 'Chip-8/Chip-8 Games' folder)
- Chip 8 hybrid: Galaxy Patrol (in 'Chip-8/Chip-8 Hybrids' folder)
- Super Basic (5.0): Backgammon, Border, Buble Sort, Checkers, Chemplay, Eliza (including 2 data files), Fetch, Graph, Haiku, Heat of Fusion, Kingdom, Life Expectancy, Love, Regression Analysis, Seabat IV, Time Line, Titration, Turning Machine, Variable Elimination (all in 'Elf/SuperBasic' folder, provided as listing in txt format as well as .super Emma 02 format)
- Tiny basic: tinybasic and tinybasic_vdu, two tiny basic 'Tic tac toe' versions, multiplication, day of week.bas, polynomial addition, polynomial dividison, simultaneous equations (all in 'Elf/TineBasic' folder)
- VDU SW: Animal Race, Backgammon, Baseball, Biorhytm, Bowling, chip-10, Craps, Dogfight, Galaxy Patrol, Lunar Lander, Miniature Golf, Monitor Editor, Tank Struggle, Tinybasic_vdu, Wumpus (all in 'Elf/VDU folder). All these use an Elf with VDU (MC6847) video chip. The mode of the chip is not set by an OUT instruction but instead set by writing to address FFxx and bit 6/7 in video memory. As far as I have figured out from the manual and code A/S is linked to bit 6 and INV to bit 7 of video memory. CSS bit 1, INT/EXT bit 2, A/G bit 4, GM0-GM2 bit 5 to 7 of address FFxx. Two configurations are provided VDU / Ascii keyboard and VDU / Hex keypad, first for Tiny basic and Monitor, second for the games.
EMMA 02 Changelog V1.34
General
- Bug fixes for Microboard setup GUIs
Installation
- Changed linux installation to make it independent of libpng version. Meaning the installer should now run on both Ubuntu 16.04 and 18.04 without issues. Same goes for other supported linux distros
→ NOWSZY [MULTI] Emma 02 V1.33
Changes introduced in V1.33
General
- Added Microboard System emulator with support for
- 11 CPU Boards: CDP18S600 to CDP18S610
- Memory boards: CDP18S620 4K RAM, CDP18S621 16K RAM, CDP18S623A 8K RAM, CDP18S625 8/16/32K ROM, CDP18S626 32/64K RAM/ROM, CDP18S627 4K ROM, CDP18S628 32K RAM/ROM and CDP18S629 32K RAM/ROM
- Others: CDP18S640 A/A1 Display, CDP18S641 UART, CDP18S646 Printer, CDP18S651 FDC, CDP18S652 Memory & Tape, CDP18S660 Memory & I/O, CDP18S661B Video (NTSC) and CDP18S661V3 Video (PAL)
- Removed CDP18Sxxx emulators as they are replaced by the Microboard System emulator
- Moved VT font file setting to VT Setup window
- Bug fixes and GUI improvements
Changes introduced in V1.32
General
- Added CDP18S600 emulator
- Added CDP18S601 emulator
- Added CDP18S603A emulator
- Added support for 38400 baud terminal emulation
- Added support CDP1804/1805 counter mode 4 and 5
Debugger
- Added back the 'old' dissassembler format as supported in V1.23 and earlier. To use this save the output file as name.txt instead of name.asm
- Added CH, CNTR and CIE values on Debug tab
- Added register trap option for CH and CNTR on Debug tab
Changes introduced in V1.31
General
- Added support for the CDP18S020 Evaluation Kit including 'real' single step mode
- Corrected bug in CDP1805 instruction handling for BCD substraction instructions
- Corrected timing issue when using CDP1804/1805 instructions
- Changed calculation of CPU speed on Debugger / message tab to 'restart' after a computer is stopped/started via F12 or RUN button switch
- Fixed a bug causing new SW files never to be found on first start-up of Emma 02
Debugger
- Support added for Elf Chip 8 variant (extra OUT4 / Fx75 instruction)
Video Coin Arcade
- Changed video timing to a 60 Hz frequency
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Added support for the 'real' Single Step feature for the Quest Super Elf
- Bug fixed on OSX causing EFx not being reset after hex keypad press when using 'screen' keypad
- Changed handling of 'IN' EF so that EF4 will always be set to 0 on an IN press even if EF4 is used for other 'HW'
- Added an option to activate EFx on every hex key press via a checkbox which is now possible to use in Elf runtime. This is replacing keyboard type Hex (+EF) which is removed.
- Added EF Button (EF3/EF4) support for Elf II
- Added games: Blockade, Cosmac Cosmos, Cosmac Cowboy, Dog fight, Dot-dash, Miniature Golf and Space Invaders
- Fixed a bug in key file handling which caused the Key file not to work on start-up but only on restart
VELF
- Changed video timing to a 60 Hz frequency (and CPU clock to 1.76)
VIP2K Membership Card
- Support added for PAL video, including PAL sequencer ROM file
- Changed F12 press to reset intead of stop of switch run mode
Chip 8
- Included Dot-dash, Minature Golf and a code correction on VIP Dog Fight
RCA Studio IV
- Changed video timing to a 50/60 Hz frequency for PAL/NTSC
→ NOWSZY [MULTI] Emma 02 V1.30
Changes introduced in V1.30
General
- Added Microtutor II emulator
- GUI improvements, including split of windows/linux and OSX main xrc file allowing for a faster start-up
- Added a check if any of the 1802 SW folers are empty; if so a question for re-isntallation of the files will be given on start-up
- Changed FRED 2 to FRED 1.5, latest information I have received is that the FRED 2 ran on an 1802 and the 1.5 on an 1801
Debugger
- Added 'SCRT' option in Debug 1802 tab to hide showing tracing for SCRT handling. See help pages for more details.
Video Terminal
- Fixed a bug causing external terminal not to work when using an actual terminal via null modem cable
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Changed the TIL313 emulation to new graphics as also used in the Microtutor II
VIP2K Membership Card
- Added 'Auto Arcade Key Definition' checkbox
- Added popup menu
MS 2000
- Fixed crash when using popup menu (F7)
MCDS
- Fixed crash when using popup menu (F7)
- Added support for second cassette interface
Telmac TMC-600
- Fixed crash when using popup menu (F7)
→ [MULTI] Emma 02 V1.28
→ [MULTI] Emma 02 V1.27
Changes introduced in V1.27 / September 23rd 2018
General
- Added emulators for the RCA Studio IV, FRED1 and FRED2
- Added SW from The Sarnoff Collection at The College of New Jersey
- Added SW from the Hagley Museum and Library: Sarnoff/RCA Collection -Joseph A. Weisbecker's archived manuscripts and materials -Accession 2464 -Box Number AVD B41
Installation
- To get the latest SW installed for the Coin Arcade, Studio II/III and COMX-35 make sure to select 'File / Re-install / 1802 Software files'.
- The wav files that are needed to run some FRED SW that are using voice on tape are not included in the installation package due to the large file size. When these files are needed Emma 02 will download the needed files after user ccnfirmation.
Libraries
- Changed libcurl to support SSL (windows version, OS X and Linux already included support)
Debugger
- Re-designed pseudo code (chip-8, ST2 etc) (dis)assembler to use syntax files
- Added debugger and (dis)assembler for the Studio IV pseudo code
- Added debugger and (dis)assembler for the FRED1 CARDTRAN pseudo code
- Added debugger and (dis)assembler for the FRED2 FEL-1, FPL-2 and FPL-4 pseudo code
- Added debugger and (dis)assembler for the Coin Arcade GPL-A (2K RAM & 2K ROM versions), GPL-2, GPL-3 and GPL-4 pseudo code
- Added debugger and (dis)assembler for the VIP STK and Test Word pseudo code
- Removed 'Chip 8' button as the direct assembler now allows 1802 or pseudo code input without need of switching mode
- Changed disassembler (when using 'Dis' button) to put all pseudo code in as 'comments'
Help
- Added help pages for the added computers and debugger features
- Syntax description for SYSTEM00, 1801, CARDTRAN, FPA-1, FPL-2 & 4, GPL-A (2K RAM & 2K ROM versions), GPL 2, 3 & 4, FEL-1, STK, Test-Word
COMX-35
- Included SW from Nicole DiBisceglie: The Amazingly Average Adventures of Arnold the Disembodied Head
Video Coin Arcade
- Included additional games from the Sarnoff Collection at TCNJ: Mines 2, Scramble-Split Second, Touche !!, En Garde !!, Katch and Kaleidoscope.
FRED 1
- New emulator for the FRED 1 machine running a 180x like prototype called SYSTEM00
- Support for two types of tape formats: PM System and 5.2/6.2 Tone
- Support for Keypad and punched card input
- Support for stopping tape loading via tone on tape (or wav file) as such allowing voice on tape and computer actions to be aligned
- Included SW from the Sarnoff Collection at TCNJ: 1K Memory Test, 21 I & II, Acey Duecy, Add Drill, Animate Demo, Binary, Bowling, Calculate, Cardtran, Cartoon, Clue, Deduce, Deduce-leds, Demo, Digit Display, Dot Jot, Draw, Eng. Apt. Test, Erase, ESP I & II, Flip I & II, Hexapawn I & II, Hi-Lo, Jackpot, Life, Luckypath, Match I & II, Memory Test, Merry Christmas, Minikrieg, Nimnet, Pattern Puzzle, Prog. Apt. Test, Seasons Greetings, Slide Puzzle I & II, Space War, Spook, Spot Speedway I & II, Target, Tic-Tac-Toe, TV Sounds #1, Utility I &Amp; II, Write 0-1, Write CD I & II.
FRED 2
- New emulator for the FRED 2 machine running a 1801 CPU with the same tape features as the FRED 1
- Included SW from Paul Robson: Acey, Deduce, FEL-1, Jackpot, Life, Match, Spacewar, Speedway, Tag-Bowling. All this SW except FEL-1 was designed by Paul!
- Included SW from the Sarnoff Collection at TCNJ: Calc, Computer Bowling, Curses Foiled Again, FPL-2, Fred Demo, GPL I & II.
- Included SW from the Hagley Museum and Library: FEL-1 Example, FPL-4 Race Example, FPL-4 Random Example, Tape Software, XMAS Music & Show.
Cosmac VIP / VIP II
- Included SW from the Sarnoff Collection at TCNJ: Android Signboard Demo, Curses Foiled Again, Curses Foiled Again Demo, Dragon, Eprom Burner, Language Sessions, Galaxy War, RCA Cosmac Picture
- Included SW from the Hagley Museum and Library: 1K Memory Test, 4096 Bit Picture, Music Original_Sailors Hornpipe-Oh Susanna-Clarinet Polica, Music Original_Sonata in G (Beethoven), Snoopy Snipe Shoot, STK-1 - LANG, STK-2 - PROG A-B-C-D, Test Word Language, VIP 1K Memory test
- Included SW from Brian Astle: VIP Roundup
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Fixed a bug in setting of 'End' address for saving in Memory Access (Quest Super Elf)
- Fixed a bug in setting of 'Exex' address for saving in Memory Access (Netronics Elf II)
- Added support for bootstrap at 8000, needed for the Super Monitor
- Added choice button for TIL311 or 313
Membership Card
- Added Front panel option to select panel versions
- Fixed WAIT and CLR buttons.
RCA Studio II, RCA Studio III
- Added NTSC support for RCA Studio III, including a NTSC / Studio III ROM file.
- Included SW from the Sarnoff Collection at TCNJ: Game Pack, Spacewar 2 & 3, ST3CTA Tester 3.
- Included SW from the Hagley Museum and Library: Color Stars and Trek, Color Runs, Color Demo, Gunfight, New Studio 2-5 Game Set, Numbers, Secret Number
RCA Studio IV
- New emulator for the RCA Studio IV including V2 and V3 ROM versions
Chip 8
- Included SW from the VIP Game Manual: VIP Dogfight, Message Center
- Included SW from the Sarnoff Collection at TCNJ: Alternate, Blackjack, Bingo, Clock Program, Game 16, Modified Kaleidoscope, Life, Pinball, Private Eye, Reversi, Space Explorer, Space Intercept, Video Display Draw, Wipe Off
- Included SW from the Hagley Museum and Library: Tic-Tac-Toe, VIP Demo - King Kong, VIP Demo
→ [MULTI] Emma 02 V1.26
Changes introduced in V1.26
General
- Added Coin Arcade emulator, including files from the Hagley Museum and Library: Sarnoff/RCA Collection -Joseph A. Weisbecker's archived manuscripts and materials -Accession 2464 -Box Number AVD B41 - Bowling, Chase, Mines, Swords and Tag-Bowling
- Corrected 'rpm' installer package, 1.25 package did not include all Configuration and data files
Debugger
- Added support for the FEL (st2 like) language for the Coin Bowling and Tag-Bowling games
Help
- Updated to reflect changes for this release
Quest Super Elf
- Fixed bug in P (memory protect) key
RCA Studio II, RCA Studio III / Victory MPT-02, Visicom COM-100
- Renamed 'Victory MPT-02' to 'Studio III / Victory MPT-02'.
- Re-ordered Studio computer list
- Added support for the Studio III Tester 3 from The Sarnoff Collection at TCNJ, S.572.11 - ST3CTA Tester 3
→ [MULTI] Emma 02 V1.25
Changes introduced in V1.25
→ [MULTI] Emma 02 V1.19
Changes introduced in V1.19
General
- Added support for the COMX SuperBoard (http://www.comx35.com/superboard.html)
- Added a powerful ‘Direct Assembler’
- Added VIP II emulator (http://www.cosmacvip.com/VIP2/VIP2.php), including FPB
- Uplifted to wxWidgets 3.0.0
- Moved version file to different internet location to try and speed up version check
- Fixed F12 handling when using VT100
- Fixed load/save machine code length (last byte was missed in some cases)
Debugger
- Replaced ‘old’ assembler and disassemble with the new ‘Direct Assembler’
- Added option to change EF flags
- Re-ordered debugger tabs
- Corrected color settings for Pager
Help
- Fixed some incorrect links in the help pages
Comx
- Added SuperBoard Support
- Fixed bug in FDC ‘side’ handling (causing F&M Disk monitor not to switch to side B correctly)
- Added Video log function
- Corrected Thermal printer EF flag (CARDT7 is now working)
- Correct mapping of 0DD-0DF memory when using floppy disk card
- Fixed a crash when using a DOS LOAD while showing the debugger tab
- Fixed load/save into/from slots
Cosmac VIP / VIP II
- Added FPB rom, fpb.bin and fpb.color
- Added support for FPB
Cosmac Elf, Netronics Elf II, Quest Super Elf
- Fixed a bug in the Device Port function that crashed on a ‘save’ of a new MC6845 address value
- Added Super Basic files for 3.0, 5.0 and 6.0 as well as configuration menus for the SB versions
- Added check before trying to load Cosmac.ram file to make sure it exists
RCA Studio II
- Added games files for: fun with numbers, star wars, pinball, concentration match and bingo
- Added Paul Robsons games: scramble, pacman, kaboom, berserk, asteroids
- Add Lee Romanov’s game: rocket and climber
- Changed text ‘Hex’ to ‘Key’ in keypad definition
Visicom COM-100
- Added game files for: cas-130
- Changed text ‘Hex’ to ‘Key’ in keypad definition
Victory MPT-02
- Corrected colours
- Replace default and pink options with Natural and Theoretical options
- Corrected background colour switch
- Corrected foreground colour when games don’t use colour info
- Added games files for: fun with numbers, grand pack, star wars, pinball, concentration match and bingo
- Added Paul Robsons games: scramble, pacman, kaboom, berserk, asteroids
- Add Lee Romanov’s game: rocket and climber
- Changed text ‘Hex’ to ‘Key’ in keypad definition
Pecom
- Added Pecom 32 ROM