[PCE] Ootake 2.92

[2] @ !!! Niedziela, 24 Listopada 2019 18:45 CET [24-11-2019 18:30 CET]

[PCE] Ootake 2.92

Nowe zmiany w  ootake autorstwa Kitao Nakamury. Świetnym emulatorze jednej z najfajniejszej konsoli PCEngine/Turbographx.

Cadash (Working Designs, 1991)

2019/11/24 2.92 released

  • Added "Show Audio Channel Graph" to "Info" menu. During game play Sound Volume Graph of each channel (6 channels + ADPCM + CDDA) can be displayed.
    • Green graph ... Wave Memory sound
    • Pink graph ... Noise sound
    • Yellow graph ... DDA Sampling sound
    • Orange graph ... LFO Modulation sound
    • White (2nd right) ... ADPCM (CD Game only)
    • Purple (1st right) ... CD-DA (CD Game only)
    • A channel whose graphs are "divided into left and right halves" is a channel that is playing with Stereo Sound.
    • You can also switch the display position and hide it by pressing [9] and [0] (numeric keypad is disabled) on the keyboard.
  • Fixed the processing timing of the built-in sound source (wave memory sound source). In "Xevious", an issue that sometimes caused the number of sounds to be low (occurred from recent versions) has been resolved. Also, I think that the tone has approached that of a real machine.
  • Added "Size x5" to the "Screen" menu. * The enlargement process is heavy on older PC. In that case, please use full screen mode without overdoing it. By the way, when the distance to the display is short, "Size x3" size is more beautiful and still fits in the field of view, so it is recommended to play comfortably. "Size x5" is useful for small displays such as small 4K displays and when you want to play a little away from the display.
  • Added "TV Scanlined 2 (Blur, Fast)" and "Non-Scanlined TV 2 (Blur for x4x5)" to the "Screen-> Mode" menu. If you are using a large window size or full screen, you can play on a large blurred screen if you use these at full HD or higher resolution. I think that this large blur is effective when playing on large LCD TV.
  • Fixed an issue that the aspect ratio of the game screen display was slightly incorrect.
  • The speed and timing were brought closer to a real machine. In "Quiz Tonosama no Yabou", resolved an issue (occurred from v2.51) that caused the screen to shake at the start of the quiz questions. In "Star Parodia", resolved an issue where the display of the rainbow scene before the first boss was a bit confusing (occurred from recent versions).
  • When using in a multi-display environment, coordinate correction processing is no longer performed even when the Ootake's window protrudes from the screen.
  • With some PC environments, in full screen mode, fixed an issue that caused V-Sync to not synchronize well and left tearing at the top of the screen. If this doesn't work, try unchecking the "Screen -> V-Sync -> V-Sync Timing Adjust" menu.
  • Organized the contents of "Audio" menu and "Setting->Audio" menu. The audio buffer amount is indicated in frame time units.
  • Removed "Direct Draw" setting in "Setting->Screen" menu. From this version, only Direct3D drawing is supported.
  • The Aero function is automatically turned off (display delay is reduced) when used with Windows7. In addition, the "Screen->Disable Aero" menu deleted in v2.88 has been restored.
  • Fixed a bug that the tempo of the sound may not be stable for about the first second immediately after opening the game ROM image file with some PC environments.
  • Fixed a bug that the game name was not displayed correctly when "&" was entered in the game name at the "Recent" menu.
  • Other minor details have been modified and improved.
→ NOWSZY [PCE] Ootake 2.98 30/08/2020
China Warrior (NEC Technologies, Inc., Oct, 1989)

2020/08/30 Oootake 2.98 PCE/Turbograpx16 Emulator

  • Fixed the problem that the tempo of sound sometimes became fast for a few seconds immediately after opening a ROM image file when using the display refresh rate of 120Hz. - It supported the operation with the display setting of refresh rate 240Hz. If the display setting of the Windows desktop is set to 240Hz, Ootake will also automatically operate at 240Hz.
    *) At window mode
  • Operation at 240Hz significantly reduces the time it takes for the Windows desktop to refresh the screen (overlap the desktop with the screens of Ootake and other applications and draw at a non-flickering timing). Therefore, the operation delay when playing with Ootake is reduced and it is very close to the feeling of the actual machine.
  • When using a 144Hz display, V-Sync does not work and the screen may wavy when scrolling, so I recommend setting to 120Hz and playing. - It also supports operation at refresh rates of 180Hz, 300Hz and 360Hz.
    *) I haven't tested it because I don't have a display of 300Hz or higher, but I think it's ok. If you have any problems, please let me know.
  • "Full Screen 180Hz" and "Full Screen 240Hz" were added to the "Screen -> FullScreen Customize" menu. By default, it switches to 60Hz in FullScreen. If you have a display of 120Hz or more, you can play with low latency by setting here. If you have a display of 300Hz or higher faster than 240Hz, select "Full Screen 240Hz" (Ootake is optimized for 240Hz operation, so 240Hz operation is the best operation).
  • "MaxSize" was added to the "Screen" menu when playing in full screen. You can make the "game display screen" smaller even when playing in full screen. It can also be set by holding down [Alt] on the keyboard and pressing [1] to [5].
    *) When playing close to the display (most PCs think so), I think it's often easier to play with a size smaller than the full size screen. This is because there is little movement of the field of view, and in the case of a retro game, the coarseness of expansion is not noticeable and the image quality is good.
    *) In Windows 8 or later, full screen mode has about 1 frame less delay than window mode. Therefore, it is also recommended to play in full screen mode in shooting games. In addition, when playing on a liquid crystal display of 240Hz or higher, you can play with low latency close to full screen even in window mode.
  • Full screen selection The default resolution has been adapted to recent PCs (wide display). [640x480, 800x600, 1024x768, 1366x768, 1920x1080, 1920x1200] - "Same Desktop (same resolution as the desktop)" has been added to the selected resolution of full screen.
    *) Depending on the display, selecting the same resolution as the desktop (1920x1080 for a full HD LCD display) will reduce the display lag.
  • The aspect ratio of the game screen has been finely adjusted to bring it closer to the actual ratio. Also, the aspect ratio of the window is kept at 4:3 even when the overscan area is displayed ([F12]key).
  • Added the SELECT button auto-fire function ("Input -> TurboButton SELECT" menu).
  • On the key config screen (black screen during key reception), described the precautions when connecting the game pad (when connecting the game pad, it is necessary to close this "black screen during key reception" once).
  • The operation speed when accessing the video chip (VDC) has been made closer to the operation of the actual machine. The problem (occurred in recent versions) that the audience at the bottom edge was not displayed on the screen at the start of the "Wonder Momo" stage (purple curtain) has been resolved.
  • The sprite display processing part has been made closer to the operation of the actual machine. The problem (generated from v2.92) that the background of the continue screen of "Dragon Slayer Eiyuu Densetsu" is disturbed has been resolved.
  • Move the operation speed and timing closer to the actual operation. Solved the problem that raster processing was disturbed (occurred in recent versions) in the demo of "Spriggan mk2" when starting the 8th stage.
  • When "Private Eyedol" is started with "no arcade card", there is a bug (planned to be fixed) that it will stop in the raft puzzle scene in the cave. So, Ootake will boot it with the arcade card (extended RAM) enabled.
  • The ROM image file of the BIOS is the same (exactly the same) in both "Super System Card 3.0" and "Arcade Card Pro", so in Ootake the arcade card compatible software also works with the ROM image of "Super System Card 3.0". (Operates with virtual RAM)
  • Fixed the horizontal display start position determination process of the screen. In "Shogi Shoshinsha Muyou", the problem that the game screen was shifted to the left was solved.
  • Fixed a bug in which the system message displayed on the upper left of the Ootake screen might remain when playing a game using a horizontal 512 dot resolution.
  • In a screen mode game such as "Tokimeki Memorial" in which the effective range of 348 dots is horizontal, if the left and right overscan areas are set to be displayed, the same color band as the actual machine is displayed (v2.91 Same processing as before).
  • Solved the problem that the display at the bottom of the screen was sometimes distorted when the RUN button was pressed on the player count setting screen in "Downtown Nekketsu Monogatari". (In this scene, the CD access speed has been reduced to the level of the actual machine). - When the "PC Engine Mouse" is connected, Ootake is automatically paused when the focus of Windows shifts to another application. (To prevent the mouse cursor from getting lost)
  • The default setting of the "Remove Lag" setting in the "Screen" menu (a function to skip the extra screen buffer and reduce the delay) has been changed to 1F(1 frame).
    *) With the recent PC & driver, the same effect can be obtained with 1F without setting 3F. (And the processing does not become heavy)
  • "Overscan Height 5dot" and "Overscan Height 3dot" have been added to the "Screen->Overscan Customize" menu.
  • Other minor details have been fixed and improved.
→ NOWSZY [PCE] Ootake 2.97 Fix
Bloody Wolf (NEC Technologies, Inc., 1990)

2020/03/21 2.97 released

  • Solved the problem that when running Ootake v2.96 released yesterday on "Windows7", an error stating "The program could not be started because there is no XINPUT1_4.dll" appeared and could not be executed. (The XInput library used in Visual Studio 2019 has been changed to the "xinput9_1_0.lib" that can be used on Windows7). In addition, it corresponds to work on WindowsXP/Vista

2020/03/20 2.96 released

  • This is a notice to those who have built and used the Ootake attached source code file. The version of "Visual Studio" in the development environment has been changed from 2008 to 2019(Community). The attached source project file is for 2019 and cannot be read in 2008. Microsoft's VS2019(Community version) can be used free of charge for personal development.
  • "Start Adjust TV Top-Position" was added to "Setting->Screen" menu. You can set the default vertical display start position when using the old TV display mode ([F11]key, narrow range display). In addition, the default value was set to [Pos 1](lines for the upper one dot and the lower five dots are not displayed).
    • When using the resume mode ("File->Set Resume" menu), the vertical display start position is saveed for each game, and it takes precedence.
  • When pressing the shortcut key of "Screen size switch" during pause, the game will remain paused even after switching the screen.
  • Fixed a bug that the buttons did not respond when connecting the second and subsequent joypads.
  • After setting shortcut keys such as the fast-forward button ("Speed-> Configure VSpeedUp Bttuon" menu), the problem that the joypad operation was not accepted until Ootake was closed once and started up again was fixed.
  • Speed and timing are closer to the actual machine. Solved the problem that the status display sometimes fluctuated in "Dungeon Explorer".
  • Fixed a bug that Ootake stopped when the number of CD-ROM drives increased or decreased due to virtual CD software, etc.
  • The screen fluctuates when pressing the [F11] key to enter overscan TV mode in "Ryuuko no Ken" (software that has low resolution at the top of the screen and high resolution at the bottom of the screen) was fixed.
  • Other minor details have been fixed and improved.

 

→ NOWSZY [PCE] Ootake 2.95

2020/02/07 Ootake 2.95 released

  • "Windows Pad Order" has been added to the pad setting screen. When connecting two or more Windows Gamepads, you can set which pad is assigned with the highest priority. Use this when the second and subsequent pads are connected, and the priority of the pad that was originally changed is lowered and the setting is shifted.
  • "Overscan TV Mode" has been added to the "Screen" menu. Since v2.92, the aspect ratio is displayed more accurately, but black belts are displayed on the left and right in the 256 dot horizontal mode. When this menu is selected, the black belt display part can be eliminated and the left and right full window display (similar to Ootake before v2.91) can be made. However, 6 dots at the bottom of the screen are hidden to maintain the aspect ratio. Originally, "6 dots at the bottom of the PC Engine screen" is rarely used for important displays, and most games can be displayed without any problems. I think that many old CRT televisions for home use had a display in this range. Use it when you want to play in that atmosphere or when you want to capture with the left and right filled when capturing the screen. You can also switch this by pressing the [F11] key.
  • "Adjust TV Top-Position" has been added to the "Screen" menu. In "Overscan TV Mode", you can adjust the vertical display start position. It can also be adjusted by pressing the [Ctrl]+[F11] keys multiple times.
  • The shortcut key of the overscan area display was changed from [F11] key to [F12] key. [Ctrl]+[F12] key can also be used to display the overscan area of top only. * [F11] key switches overscan TV mode. * If you want to switch to full screen, press [Alt]+[Enter] key. Also, when displaying the overscan area, only the top and bottom areas are displayed by default.
  • When pressing [F12] key while pressing [Ctrl] key, only the top part is displayed in the overscan area.
  • "Start Overscan TV Mode" has been added to "Setting->Screen" menu. Use this mode when you want to switch to overscan TV mode (the viewing range is as narrow as an old home TV) from startup.
  • Cleaned up the "Capture" menu. Also, screenshot size and drawing method are displayed in the menu.
  • "Overscan display state" is not restored during normal state loading. It restores only when loading resume(Turn on the "File->Set Resume" menu).
  • When switching overscan area display ([F11] key) in window mode, if the window is below the center of the desktop screen, the window position after switching is adjusted to the bottom side.
  • In the audio graph display ([9],[0] keys), in some games, the yellow graph remained even when the DDA sampling sound was muted. This problem has been corrected.
  • Fixed the problem that the pad was not reflected when changing the gamepad while Ootake was running when setting the gamepad.
  • "1366x768" was added to the FullScreen resolution setting menu field.
  • "FullScreen 640x480 60Hz" in the "Screen" menu (for switching to full screen mode with any PC environment) has been changed to "FullScreen 800x600 60Hz". Also, at the time of execution, the drawing method is returned to the default(Direct3D).
  • When switching to full screen ([Alt]+[Enter] key), the screen is switched stably even in a PC environment where the available memory is low.
  • Fixed a bug (from v2.92) that it display was shifted in a game that can play with 4-split display.
  • The speed and timing have been made closer to those of the real machine. In "Chibi Maruko Chan", solved the problem that the display of the raster interrupt part was distorted when clearing the stage.
  • Fixed a bug that recording of the play record function ( "Capture->Play Record" menu) was not performed correctly at some games.
  • Other minor details have been fixed and improved.
→ NOWSZY [PCE] Ootake 2.94

2019/12/25 2.94 released

  • "*About Windows Display-Lag" was added to "Screen" menu. Displays the Windows (video card control panel) setup method for "realizing low display-lag" with V-Sync. The following is the contents. Windows settings are required to run Ootake with the same operational feeling as a real machine. If the Windows graphic driver is set to perform vertical synchronization (V-Sync), it will interfere with the Game's V-Sync and cause "Display Lag". Right-click on an empty area of the desktop and open Settings (Control Panel) of the video chip maker(NVIDIA, AMD, Intel) and set "Vertical sync" in "3D(game) settings" to "Off".
    These settings can be made for each game with NVIDIA and AMD. With GeForce, if Windows10/8, set "Low Latency Mode" to "Off" at the same time (necessary to reflect the vertical sync off). For Windows7(Non-Aero) and earlier, it is recommended to set "Low Latency Mode" to "Ultra" to further reduce the display lag. "Ultra" at "Low Latency Mode" is recommended for Win7(non-Aero). On the contrary, please pay attention that "Off" at "Low Latency Mode" is recommended for Win10/8 (in case of Ootake).
    This situation may change depending on future driver updates.
  • The program has been optimized so that even the "PC with power saving settings" will not lose processing and will operate like a real machine.
    • In addition, if you use "MSI AfterBurner (video card utility software)" which is considered to be used by a large number of users, if power saving is set, processing will periodically drop and Ootake is not working smoothly (The same problem exists for games with a low GPU load other than Ootake).
    • In the case of using AfterBurner or in a PC environment where the processing drops even with v2.94 this time, set the power saving setting in the control panel of the video card driver (for GeForce "Manage 3D Settings"->"Power management mode"), try setting to not save power ( "Prefer maximum performance"). By the way, AfterBurner's similar software "ASUS GPU Tweak II" works comfortably without the Ootake processing drop even if the PC was set to power saving (With even MSI's video card works well).
  • Made the gamepad settings easier. Directional pad is common setting for all 2-button, 3-button and 6-button pad settings, and only button setting is set for 2-button, 3-button and 6-button pad respectively.
  • Corrected left and right black belt processing in horizontal 352 dot mode. In the scene of "Ijuin appearance" of "Tokimeki Memorial", the problem that white flash processing was spread too much was solved.
  • When "R-TYPE Complete CD" is played so that flickering of sprites is not reproduced (default), the black band display on the left and right sides of the screen is visible without being hidden (similar to the HuCard version). In addition, "R-TYPE (U)" has been operated in the same way ( I had an overseas person check the operation. Thank you).
  • Added "FullScreen 240Hz" to the "Screen->FullScreen Customize" menu.
  • Added (Revived) "DirectDraw (Old)" to the "Setting-> Screen" menu. Drawing with DirectDraw was deleted in v2.92, but this time it has been restored. Although it is an old drawing method for PC of the age of Windows95, it is still useful when using "low resolution full screen". Use it when you want to display dot-by-dot with cathode ray tub (CRT). In addition, when drawing DirectDraw, the display of "Sound Graph (Info-> Show Audio Channel Graph)" and "x5 times display" added in v2.92 are not supported. With DirectDraw, even when new functions are added in the future, new functions are probably not supported due to development time.
  • When resume loading each game, "Window non-stretch setting at the last play" is also restored. Basically, most games are well made to the 4:3 ratio, so it's not recommended unless personally enough, but if you have a game that is easier to play with dot-by-dot, use it Please do it.
  • When overscan area display switching (F11 key) is performed in the window mode, centered the window (center position adjustment) for both horizontal and vertical.
  • When switching from full-screen display to window display, if the resolution setting for full-screen display was set low (default), fixed a bug that reduced the size of the window display.
  • Fixed a problem that V-Sync was not perfect and tearing occurred depending on some PC environment when playing in the "x4" window size.
  • Other minor details have been fixed and improved.
→ NOWSZY [PCE] Ootake 2.93

2019/11/26 2.93 released

  • Fixed sprite display processing bug. In "Ys III", fixed a bug that the  start screen was missing.
→ [PCE] Ootake 2.91

2018/07/29 2.91 released

  • The processing timing of the internal sound source (wave memory sound) has  been adjusted. I think that it approached the sound of the real machine.
  • As a result of the above adjustment, the problem that Ootake may not move smoothly if the power plan of the control panel and the graphic driver setting are "power saving" mainly when using notebook PC of Windows10 was solved.
  • The speed and timing approached the operation of the real machine. In the "Power Drift" demo screen (during no operation), the problem that raster scroll was flickering for one frame was solved.
  • Additionally, a detailed part has been improved and corrected.
→ [PCE] Ootake 2.90

Ootake 2.90 2018/06/02

  • When "R-TYPE Complete CD" is started, press [RUN] button for a long time( until irem's logo appears), and the mode to automatically skip the demo scene will be set.
    • If you normally press [RUN] button, it will start up normally. If you want to completely cut off this function, please uncheck "Setting-> Improve-> Auto Skip Demo [start keep RUN] (R-TYPE Complete CD)" menu.
  • From Ootake v2.88, the bug of processing "Backup RAM (Ten no Koe 2) file was formatted to save only the required 2KB" was fixed.
    • The timing of saving the "bram file" is the moment when either "Close Ootake", "Open other games","Save State" was done.
    • Even with the above timing, if the contents to be saved are exactly the same as the last time (eg in RPG does not have equipment or experience value update at all), the bram file will not be updated. In that case, if you want to be able to load the "bram file (2047 bytes) saved with Ootake v2.88 & v2.89" in Mednafen, please add 1 byte (value 0) at the end with binary editor etc and save it as "2048 bytes". I'm sorry for troubling you.
  • Improved processing of inputting the game pad. Even with low power PC, I think that several games ("Power Drift", "Space Harrier" etc.) have come to work comfortably.
  • Additionally, a detailed part has been improved and corrected.
→ [PCE] Ootake 2.89
Power Drift (Asmik Ace Entertainment, Inc., Apr 13, 1990)

2018/05/18 2.89 released

  • Fixed a bug that the display-lag countermeasure implemented in v2.88 was not working in many PC environments of Windows 8/10/Aero.
    • In the case of operation on Win8/10 or Aero, Windows automatically performs V-Sync processing. therefore, 1 frame delay buffer is included. So, compared to WinXP or non-Aero Vista/7, one frame delays appears absolutely. Still, compared to Ootake2.87 or earlier, I succeeded in shortening the delay of about 1 to 2 frames.
    • With the most excellent Win7(non-Aero setting), it is about 1 frame lag compared to the real PC Engine. * It is the result I measured by connecting to the same liquid crystal display(about 1 frame lag).
    • A common low-cost PC game pad (you need to press the four-way key deeply ) has "physical delay on its game pad itself". Please use an easy to operate game pad like a consumer game machine. Examine the net information and you will find a good game pad. Incidentally, controller of PS4(sony) can also be used with Ootake.
  • In "Space Harrier", "Power Drift", HES files etc, (a game with many reference times of controller), fixed a bug that the operation was extremely heavy (occurred in v2.88, processing was heavier when XInput compatible game pad was disconnected).
  • When "3-Button Pad" is connected, hold down the "Function Button" and press the [IIIr] button, you can start another game from the recent history. You can also shoot screenshots with the [IIIs] button while holding down the "Function Button". ("Function Buttons + RUN or SELECT" can also be used as before)
  • When "6-Button Pad" is connected, hold down the "Function Button" and press the [III] button, you can start another game from the recent history. You can also shoot screenshots with the [IV] button while holding down the "Function Button". ("Function Buttons + RUN or SELECT" can also be used as before)
→ [PCE] Ootake 2.88
Jackie Chan's Action Kung Fu (a.k.a. Jackie Chan) (Hudson Soft Company, Ltd., 1992)

Ootake 2.88 released 2018/05/03

  • The display delay is removed by 1 frame.
  • "Plus 2 frames delay" of Windows Aero(Windows Vista and 7) and Windows 8(8.1)/10 is also removed. Depending on the PC environment, together with the above, 3 frames delay is removed.
  • "Remove Lag 3F", "Remove Lag 1F", "Remove Lag 0F" was added to "Screen" menu. You can toggle whether or not "the display delay reduction processing" described above. When "Remove Lag 0F" is selected, the same display delay as v2.87 or earlier version of Ootake will be obtained. Switching "3F" or "0F" on Aero (Win7/Vista) or Win8/10, I think that delays(lag) can be experienced with shooting games and sports games. In addition, I am planning to describe this delay reduction technology on the Ootake official website soon. http://www.ouma.jp/ootake/
  • XInput compatible game pad can be used. By using Microsoft's driver, it was able to use it so far. In this version upgrade, if the input responds of XInput earlier, it will take precedence.
  • Backup RAM (Ten no Koe 2) file has been formatted to save only the required 2KB. I think that this is probably interoperable with the save data of Mednafen(wonderful emulator!). You can also read the 8KB file( "_bram.dat") saved in the past version and the backup RAM file( 8KB) of another older PCE emulator.
  • Fixed a bug (occurred in v2.87) in which buttons IV to VI sometimes did not work depending on the environment in 6-button pad compatible games.
  • The timing approached the operation of the real machine. In "Terraforming", the problem that the screen collapsed (occurred from v2.81) has been resolved.
  • In VS 2008 in my development environment, the setting at the time of build prioritized the operation speed.
  • Additionally, a detailed part has been improved and corrected.

Tagi: Turbografx 16, Ootake, Pce, Pcengine, Tgx16

wstecz24/11/2019 18:45
Inne treści związane z tematem
[PCE] Ootake 2.98 30/08/2020 [PCE] Ootake 2.98 30/08/2020
Nowe zmiany w  ootake autorstwa Kitao Nakamury. Świetnym emulatorze jednej z najfajniejszej konsoli PCEngine/Turbographx.
[PCE] Ootake 2.97 Fix [PCE] Ootake 2.97 Fix
Nowe zmiany w  ootake autorstwa Kitao Nakamury. Świetnym emulatorze jednej z najfajniejszej konsoli PCEngine/Turbographx.
[PCE] Ootake 2.95 [PCE] Ootake 2.95
Nowe zmiany w  ootake autorstwa Kitao Nakamury. Świetnym emulatorze jednej z najfajniejszej konsoli PCEngine/Turbographx.
[PCE] Ootake 2.94 [PCE] Ootake 2.94
Nowe zmiany w  ootake autorstwa Kitao Nakamury. Świetnym emulatorze jednej z najfajniejszej konsoli PCEngine/Turbographx.
[PCE] Ootake 2.93 [PCE] Ootake 2.93
Nowe zmiany w  ootake autorstwa Kitao Nakamury. Świetnym emulatorze jednej z najfajniejszej konsoli PCEngine/Turbographx.
Do ściągnięcia
Dodatkowe informacje
Komentarze

T-shirt "Sorcery Bajtek"

Retro T-Shirt Sorcery Bajtek - męski podkoszulek
Newsy Linkownia Emulatory na PC Wideoteka Screenshoty Bajtek Reduks Ready.Run

© Try2emu 1999 - 2020 | Krzysztof 'Faust' Karkosza Google+Kontakt