Simon Owen opublikował nową binarkę swojego emulatora (imo z dostępnych najlepszego) mikrokomputer Sam Coupe - przynajmniej dla mnie konstrukcji będącej ukoronowaniem historii Z80A w domowych mikrokomputerach.
SimCoupe v1.2.5 release 26/08/2021
Changes since the last release:
- fixed CRLF issue reading old Linux/macOS configuration files (#62)
- fixed first reset after DI;HALT failing due to incomplete CPU reset.
- fixed file selector showing /home instead of full $HOME
- fixed RETI to restore iff1 from iff2 (undocumented).
- restored support for CMOS Z80 behaviour [out (c),0/255].
- restored register init for hard/soft reset.
- added support for in-memory Comet symbols. (#63)
- added support for exporting debug symbols to .map (#63)
- improved auto-type to ensure turbo mode is turned off.
SimCoupe v1.2.4 release 22/08/2021
Changes since the last dev release:
SimCoupe v1.2.3 release 14/08/2021
→ NOWSZY [SAM] SimCoupe v1.2.13 14/01/2024
SimCoupe v1.2.13 release 14/01/2024
Changes since the last release:
- fixed shifted SDL key symbols not working in debugger (#90)
- fixed truncated WAV audio recordings due to missing close+flush
- fixed "Pause" not clearing in Win32 caption after CPU reset (#91)
- fixed phantom inputs on later SDL joystick axes causing issues (#80)
→ NOWSZY [SAM] SimCoupe v1.2.6 10/09/2021
SimCoupe v1.2.6 release 10/09/2021
Changes since the last release:
- fixed read-only disk error with Pro-Dos v2 (#64)
- fixed failure to recognise inserted tape images.
- fixed missing icon end marker that risked crash under Win32.
- changed Comet symbol export to always scrape from memory (#63)
- changed symbol export to save use local line endings (#63)
- changed to use MSVC runtime DLLs instead of static linking.
→ [SAM] SimCoupe v1.1 alpha Build 2020/07/07
20210707 build 07/07/2021
Changes since the last release:
- fixed main screen memory contention alignment (#54).
- fixed debugger single-stepping just index prefixes (#53).
- fixed instruction trace showing double registers when only half changed.
- fixed step-out feature in debugger.
- fixed debugger benchmark mode still processing interrupts.
- fixed cancelled line interrupt end event showing in debugger.
- added 'tryvrr' option (default=true) to try Variable Refresh Rate video.
- added Ctrl modifier to run more instructions using the KP4/5/6.
20210624 build 26/06/2021
*** TIMING BROKEN, DO NOT USE ***
Changes since the last release:
- improved frequency of generated sound output (#36)
- improved bus values from unhandled ports (fixes KEDisk)
- improved aspect ratio (59:54) to match signal details
- changed visible areas to better reflect what can be seen on a TV
- renamed borders option to visiblearea
- added alternate debugger display mode to give full refresh (#46)
- restored -autoboot command-line option (#49)
- removed prompt to save changes to disks
- fixed border artefact colour if using upper 8 colours
- fixed incorrect zoom handling when fullscreen/minimised/maximised
- fixed missing allophone data file in non-Windows installations
- fixed %s shown in disk insert message [SDL]
- fixed current debugger trace entry colour
- changed to more accurate Z80 CPU core
- changed to pull SAASound from official project at GitHub
20210501 build 01/05/2021
Changes since the last release:
- fixed fullscreen and window position saving issues (#31)
- fixed crash opening empty tape image (#34)
- fixed frozen screen after keyboard speedup (#35)
- fixed Blue Alpha VoiceBox being detected when disabled (#40)
- fixed half-height GIF animations (#38)
- fixed cursor positioning in hex edit mode (#41)
- fixed some UTF-8 path encoding issues (#32)
- fixed issue selecting non-existent recent file
- renamed Atom Legacy to Atom Classic
- hide some OS key combinations from emulation
- allow debugger to be toggled
→ [SAM] SimCoupe v1.1 alpha 1 Build 2020/08/27
20200827 build 28/08/2020
Changes since the last release:
- added support for Blue Alpha VoiceBox.
- changed default external memory to 1MB (new installs).
- changed motion blur to lerp instead of max.
- fixed error on minimising window [Win32]
- fixed wrong menu shortcut for motion blur (Shift-F6, not F7) [Win32]
- fixed AVI recording being half height.
- fixed New Disk only working if disk already existed.
- fixed function key options being truncated by old SimCoupe.
- fixed dropped tape files not adding to MRU menu.
→ [SAM] SimCoupe v1.1 alpha 1 Build 2020/08/19
20200819 build (updated), 19/08/2020
- updated D3D9 backend to D3D11 for G-Sync/FreeSync support (fullscreen).
- updated DirectSound backend to XAudio2 2.9, for better dynamic device support.
- added integer scaling to reduce scaling artefacts, especially in debugger.
- added sRGB support to rendering pipeline for gamma-correct blending.
- added motion blur option to reduce Gigascreen animation flicker.
- added alt- window scaling up to Alt-9 (500%).
- added multi-sector read support to ATA devices (used by PlayAnimHD).
- changed frame sync to be time based for smoother frame delivery.
- changed function key mappings to use strings in config file.
- fixed reset when LINE port set to zero giving black boot screen.
- fixed creating new MGT/CPM images.
- removed video scanline support, which is less useful on modern displays.
- removed window size snapping and forced window size changes.
- removed real Windows printer support.
20200711 build (refresh) 11/07/2020
- Fixed data corruption writing to Atom devices (doesn't affect Atom Lite).
- added more ROM0 symbols for jump table entries and block instruction.
- Added shortcut for UNTIL breakpoints, allowing just an address to be entered.
- Updated SAASound to v3.4.0 to fix #23
20200528 build 28/05/2020
- Changes since the last release:
- Added support for LPEN b0 over main screen.
- Added SOFF support for LPEN and HPEN.
- Fixed TXFMST active time after MIDI OUT.
- All current ASIC tests now match original hardware.
20200524 build 24 May 2020
- added experimental SSX screen image saving.
20200512 released 12 May 2020
- fixed CPI/CPD/CPIR/CPDR instruction timings
→ [SAM] SimCoupe v1.1 alpha 1 Build 2020/03/24
→ [SAM] SimCoupe v1.1 alpha 1 Build 2020/01/17
SimCoupe Version 1.1 alpha 1 build (20/01/19)
- fixed issue if PC changed when CPU is halted.
- fixed missing silence in WAV recordings.
- fixed bad WAV recordings under Linux x64.
- fixed refreshing debugger on reset or NMI.
- fixed PNG saving writing invalid images.
- fixed Atom media detection.
- fixed use of Atom Lite ROM when enabled in drive 1 slot.
- added keypad support for debugger number input.
- restored support for external SAASound library.
- moved ROM images to external files.
→ [SAM] SimCoupe v1.1 alpha 1 prerelease
SimCoupe Version 1.1 alpha 1 (2015-04-09)
- Added tape loading from TAP/TZX/CSW files, with flash and trap features
- Added SID interface emulation with traditional 6581 or newer 8580 chip
- Added video recording to AVI (MS-RLE) or GIF, and audio recording to WAV
- Added support for Atom Lite+ interface with installed DALLAS chip
- Added persistent DALLAS NVRAM (8K) support
- Added support for Blue Alpha Sampler, SAMVoc and Paula DACs
- Added support for Velesoft Kempston joystick interface
- Added manual speed control between 50% and 1000%
- Added ROM-based auto-typing of clipboard text [Win32]
- Added D3D9 [Win32] and SDL2 [Mac and Linux] accelerated video support
- Added ROM symbol support to debugger, with user symbols from <disk1>.map
- Added command-line input mode mode to debugger for more complex commands
- Added execution, memory access, I/O, and interrupt breakpoints
- Added pulsing dot at current raster position when debugger is active
- Added code tracing feature, showing path leading to current instruction
- Added timing measurement to aid consistent comparison of code alternatives
- Added support for runtime RAM and ROM configuration changes without reset
- Added complete ATTR port (FF) emulation, used by some Spectrum software
- Added undocumented bit 3+5 flag behaviour to SCF/CCF
- Added optional NMOS/CMOS Z80 support, for OUT (C),0/255 difference
- Added automatic keyboard layout switching when Spectrum ROM is present
- Added LBA28, 8-bit mode, and slave support to ATA device emulation
- Added HDF v1.1 support, with extended IDENTIFY fields
- Added SAMDiskHelper support for non-admin access to HDD/CF devices [Win32]
- Added per-user settings with portable mode for legacy behaviour [Win32]
- Fixed NMI erroneously clearing IFF2
- Fixed missing R increment on interrupt acknowledgement
- Fixed HEPR bug which could lead to an invalid paging configuration
- Fixed video re-sync audio glitches by syncing to audio clock instead
- Fixed intensity of border artefacts, which were previously too bright
- Fixed DAC sample origin not being zero, which reduced playback quality
- Fixed SAMDAC/EDDAC to only output new samples when strobed
- Fixed output from simultaneous use of DACs on both parallel ports
- Fixed FDC registers not being writable without a disk in the drive
- Fixed FDC multi-sector reading, which caused SAM Mines disk error
- Fixed FDC to use 2 bit size codes, matching WD17xx behaviour
- Fixed corruption in SBT images over 400K due to repeated directory sector
- Fixed invalid CHS geometry on disks over 8GB
- Fixed data import/export sometimes clipping to 16K
- Fixed failed writes to HDD/CF volumes under Vista or later [Win32]
- Changed full-screen option to use the current/native display mode
- Changed window click to capture mouse only if SAM software is using it
- Changed options to use larger and simplified property pages [Win32]
- Changed SBT virtual images to contain auto-executing code files
- Changed built-in SAMDOS2 image to enable drive 2 and disable border flash
- Changed debugger to use hex input by default, matching displayed values
- Removed support for Win9x and W2K due to limited API and tool support
- Removed support for SDF and TD0 disk images, and SAD image creation
- Removed SD-IDE and YAMOD.ATBUS interfaces, and Atom boot ROM patching
- Removed support for user-defined function key mappings [Win32]
- Removed support for real printer devices [Win32]
wstecz02/09/2021 00:34
Inne treści związane z tematem
[multi] BizHawk x64 2.10.1 RC1 14/09/2024
Jeśli pojawia się RC to wiedz, że pełna wersja niebawem się ukaże. Multiemulator BizHawk, pozwala udawać konsole: Nintendo Entertainment System / Famicom / Famicom Disk System (NES/FDS), Super Nintendo (SNES), Nintendo 64, Gameboy, Gameboy Color, Super Gameboy, Sega Master System, SG-1000, Game Gear, Sega Genesis / Sega-CD, Sega Saturn, PC-Engine (TurboGrafx-16) / CD-ROM, ...
[multi] DSP 0.23 VIP4 29/09/2024
Emulator DSP sygnowany przez imć Leniada, pozwalaja na zabawę maszynkami arcade i ośmiobitowcami - CPC, ZX Spectrum (z bardzo fajnie rozwiązanym podglądem plików), a także Colecovision, Nintendo 8 i CGB/GB - wszystko, co ma Z80 na pokładzie jest mile widziane;)
Ostatnia pełna wersja tego DSP Emulator DSP 0.22 Final pojawiła się 19 listopada 2023 r.
[zx] Spud 0.307b 30/12/23
Jest taki zestaw emulatorów, albo w zasadzie autorów emulatorów, którzy do swoich programów podchodzą w sposób mistyczny - albo piszą do poduszki i wrzucają od czasu, do czasu, na jakimś forum informację o nowej wersji, albo informują o nim tylko nielicznych. Do tej grupy na pewno należy SPUD, miły i fajny emulatorek sprzętu ZX Spectrum autorstwa ...
[zx] ZEsarUX 11.00 - Version David 6/06/24
ZEsarUX to multiemulator maszynek ze stajni Sir Clive'a - znajdziemy w nim praktycznie wszystkie modele począwszy od ZX80, przez tradycyjne modele Spektrusia, łącznie z tymi, które pojawiły się już z logiem Amstrada, aż po egzotyczny Z88 Cambridge i Spectrum QL. ZEsauRX poradzi sobie też z emulacją Sam Coupe, czy też CPC464 (o innych egzotykach nie wspomnę, jak np. emulacji ...
[zx] ZEsarUX 11.0 Beta 2 David edition 20(09??)/05/2024
ZEsarUX to multiemulator maszynek ze stajni Sir Clive'a - znajdziemy w nim praktycznie wszystkie modele począwszy od ZX80, przez tradycyjne modele Spektrusia, łącznie z tymi, które pojawiły się już z logiem Amstrada, aż po egzotyczny Z88 Cambridge, gdyby nie brak QL można by było powiedzieć, iż emuluje on wszystko z tej rodziny. ZEsauRX poradzi sobie też z emulacją Sam ...